Performing Common Tasks
Editing records
Wrist PDA User Guide 81
Using the Edit menu
The Edit menu is available from any screen where you enter or edit
text. As a general rule, the Edit menu commands affect selected text.
You can display the Edit menu by tapping the tab at the upper-left
corner of the screen, or by writing a ShortCut.
To use the Edit menu:
1. Do one of the following to display the Edit menu:
• Tap the tab at the upper-left corner of the screen; then tap the
Edit menu to display the commands in the menu.
• In the text input area, drag a diagonal line from the lower left
to upper right to display the Command toolbar. To select a
command, either tap the icon representing a command on the
Command toolbar, or draw the ShortCut in the text area of
your screen.
2. Choose from the following commands, depending on the
application you’re using:
• Undo reverses the last action taken.
• Cut removes a selection from its current location to memory.
You can then paste the text into another area of the current
application or into a different application.
• Copy copies a selection and moves it to memory. You can
paste the selection into another area of the current
application or into a different application.
• Paste inserts a selection from memory into an area you select.
Paste produces no result if you have not used the Cut or
Copy commands.
• Select All selects all the text in the current record or screen.
• Keyboard opens the onscreen keyboard. Tap Done to close
the keyboard.
• Graffiti2 Help opens the Jot character stroke screen.
To Next Page
Loading...
Need help?
General