Introduction to the Wrist PDA Watch
Using the stylus
16 Wrist PDA User Guide
Using the stylus
The stylus is integrated into the
wristband (for metal bands) or into a
holder on leather or plastic bands. To
use the stylus, slide it straight out as
shown.
Ta p p i n g. Tap with the stylus to select items on the screen, or to
position the cursor in text.
If you are having trouble selecting an object, such as a button, slider,
or checkbox, try tapping and holding the stylus on the object.
Selecting. To select a section of text, press and hold the stylus in
place until the watch “chirps.” Then drag the stylus to the right
along the section of text you want to select. This highlights or selects
the text.
IMPORTANT: Do not use a pen, pencil, or any other sharp
object to write on the screen. A spare stylus is included with the
watch. If you misplace your stylus, visit www.fossil.com for
information on getting a replacement.
If you have difficulty accurately selecting items on the screen, you
may need to calibrate the screen. See page 132.
To Next Page
Loading...
Need help?
General