Franke Evolution User Manual

Franke Kaffeemaschinen AG
TD-100228 A.doc page 22 / 33
8. Check Inputs
1 Temp. coffee only Top model Temperature sensor B4 in coffee boiler
2 Autosteam option Temperature sensor, end of steam pipe
3 Temp. hot water If setting 1.5 is configured ‘No’
4 Flowmeter Display On / Off corresponding increment
5 Level Level probe B3 in HW/S boiler
780 = empty / 400-600 = full
6 Current BU-motor up (+) / down (-) Brewing unit motor test
7 Choco Input 1 Display On / Off
8 Choco Input 2 Display On / Off
9 Water tank Display On / Off for setting 1.29
10 Door Microswitch for drawer door
11 Coffee outlet Microswitch for frother head
12 Pressure switch Display On / Off corresponding to regulator S1
13 Piston position Microswitch for brewing unit
14
15 Supervision cup Display On / Off for setting 1.31
16 Milk level Display On / Off corresponding to
capacitative switch in the refrigerator

Franke Evolution Specifications

General

Power Supply	220-240 V
Water Supply	Tank
Water Connection	No
Material	Stainless Steel
Programs	Espresso, Coffee, Cappuccino, Latte Macchiato, Hot Water
Display	Yes
Milk System	Integrated