Fronius Robacta TC 1000 - Robacta TC Device Specifications; Cleaning Unit S;P Specifications

Technical data
General
CAUTION!
Danger due to insufficiently dimensioned electrical installations.
This can result in severe damage to property.
▶
Dimension the mains lead and its fuse to suit the device being used.
The technical data shown on the rating plate applies.
Robacta TC
1000 / Robacta
TC 1000 ext.
(Base unit) /
Robacta TC
1000 Twin /
Robacta TC
1000 Twin Com-
pact
Robacta TC 1000 /
Twin / Twin Com-
pact
Robacta TC 1000
ext. (Base unit)
Mains voltage 230 V 230 V
Mains voltage tolerance -15% / +15% -15% / +15%
Grid frequency 50/60 Hz 50/60 Hz
Nominal output 180 W 180 W
Mains fuse protection (slow-blow) 10 A 10 A
Compressed air supply 6 bar
86.99 psi
-
-
Minimum cleaning interval 45 s 45 s
Discharge current Approx. 1500 A Approx. 1500 A
Discharge voltage 270 V DC 270 V DC
Dipping bowl minimum capacity 0.75 l
0.20 gal.
-
-
Degree of protection IP 21 IP 21
Dimensions l/w/h 330 / 250 / 422 mm
12.99 / 9.84 / 16.61
in.
330 / 250 / 422 mm
12.99 / 9.84 / 16.61
in.
Weight (without "dip-in" parting
agent)
13 kg
28.66 lbs.
11.5 kg
25.35 lb.
EMC device class A A
Marks of conformity CE, CSA CE, CSA
Cleaning unit
S/P
Cleaning unit S Cleaning unit P
EMC emission class A A
Compressed air supply 6 bar
86.99 psi
6 bar
86.99 psi
Dimensions l/w/h 212 / 121 / 119 mm
8.35 / 4.76 / 4.69 in.
365 / 202 / 300
14.37 / 7.95 / 11.81
in.
85
EN