Control panel
General All functions of the cleaning unit are activated by the robot control. For adjust-
ment, the cleaning operation can be manually triggered on the control panel.
NOTE!
The individual illustrations may differ slightly from your device.
However, the functioning of the controls and the connections is identical.
Control panel
(1) Mains voltage indicator
lights up when the device is powered by mains voltage
NOTE!
If the capacitors in the device are charged, they will usually discharge automat-
ically as soon as the device is unplugged from the mains. Discharge time is usu-
ally approx. 1 second.
If an error occurs, it is possible that the capacitors will not discharge. If this hap-
pens, you must follow the instructions in the Fault procedure section on page
78.
(2) Overtemperature indicator
lights up when the device overheats
NOTE!
One more cleaning operation can be carried out after this indicator lights up.
Only once the device has cooled back down to the operating temperature will
the device recharge in preparation for the next cleaning operation.
(3) Fill level indicator
will come on
28
To Next Page
Loading...