Settings – Battery
Battery Service: Battery module replacement (only with Fronius Solar Battery)
Service mode allows you to replace and extend the battery modules and is also intended
for test purposes.
When this mode is activated, the Fronius Solar Battery is charged or discharged by
means of a 10 A current or with the maximum inverter power, regardless of any other
parameter settings. The charging or discharging process continues until the state of
charge stands at 53% (the SOC of new battery modules on delivery). The process can
be aborted at any time.
Once this SOC has been reached, the system maintains it until Service mode is deactiv-
ated again.
Disable calibration charging (only with Fronius Solar Battery)
Pressing "Disable" disables the calibration charging for three hours.
118
To Next Page
Loading...
