The INFO menu item
Measured values PV ins.
Insulation resistance of the photovoltaic system and the storage system
Ext. lim.
External power reduction in per cent e.g. specified by grid operator
U PV
Current PV voltage on the terminals even if the inverter is feeding in no power whatso-
ever
GVDPR
Grid voltage-dependent power reduction
Fan #1
Percentage of target output for fan
PSS status The status of the most recent inverter fault can be displayed.
IMPORTANT! Due to the low level of insolation early in the morning and in the evening,
the status codes STATE 306 (Power low) and STATE 307 (DC low) are displayed
routinely at these times of day. These status codes do not indicate any kind of fault at
this point in time.
- Press the "Enter" key to see the status of the power stage set and the most recent
fault
- Use the "Up" and "Down" keys to scroll through the list
- Press the "Back" key to close the status and fault list
Grid status The five most recent grid faults can be displayed:
- Press the 'Enter' key to see the five most recent grid faults
- Use the 'Up' and 'Down' keys to scroll through the list
- Press the 'Back' key to close the grid fault display
Device informa-
tion
For displaying the settings that will be of relevance to a power supply company. The val-
ues shown will depend on the country setup or the device-specific settings of the
inverter.
Display area General / Country-specific setting / MPP tracker / Grid monit-
oring / Grid voltage limits / Grid frequency limits / Q-mode /
AC power limit / AC voltage derating / Fault Ride Through
General: Device type
Fam.
60
To Next Page
Loading...
