Fronius Symo Hybrid 3.0-3-S - SETUP Menu Item Navigation (continued); General Menu Entry Settings; Setting the Inverter Time

- The inverter switches from wherever it is on the menu level back to the "NOW" dis-
play mode (exception: "Standby" Setup menu item).
- The display backlighting goes out.
- The current power of feeding in is displayed.
Setting menu
entries, general
1
Open the desired menu
2
Use the 'Up' or 'Down' keys to select the desired menu item
3
Press "Enter"
The available settings are displayed: The first digit of a value to be set
flashes:
4
Use the 'Up' or 'Down' buttons to
select the desired setting
5
Press the 'Enter' key to save and
apply the setting.
To discard the setting, press the
'Esc' key.
4
Use the 'Up' or 'Down' keys to
select a value for the first digit
5
Press "Enter"
The second digit of the value flashes.
6
Repeat steps 4 and 5 until ...
the whole value to be set flashes.
7
Press "Enter"
8
Repeat steps 4 - 6 as required for
units or other values that are to be
set until the appropriate unit or the
value flashes.
9
Press the 'Enter' key to save and
apply the changes.
To discard the changes, press the
'Esc' key.
The currently selected menu item is dis-
played.
The currently selected menu item is dis-
played.
Application
example: Setting
the time
Relay
Standby
Relay
Clock
Display Setting
Energy Yield
1
Select “Time / Date” from the
Setup menu.
2
Press the “Enter” key.
An overview of the values that can be
changed is displayed.
3
Use the “Up” or “Down” keys to
select “Set time”.
4
Press the “Enter” key.
58