Fronius Symo Hybrid 3.0-3-S - Menu Navigation at the Inverter; Display Backlighting and Menu Access; Menu Item Overview

Navigation at the menu level
Activating dis-
play backlighting
1
Press any key
The display backlighting is activated.
There is an option under "Display Settings - Backlighting" in the SETUP menu to set
the display backlighting so that it is on all the time or off all the time.
Automatic deac-
tivation of display
backlighting /
changing to the
"NOW" menu
item
If two minutes pass without any button being pressed, the display backlighting switches
off automatically and the inverter goes to the "NOW" menu item (assuming the display
backlighting is set to AUTO).
The automatic selection of the "NOW" menu item can happen from any position on the
menu level, unless the inverter was manually switched into the "Standby" operating
mode.
After automatically selecting the "NOW" menu item, the current power of feeding in is
displayed.
Opening the
menu level
1
Press "ESC"
The display switches to the menu level.
2
Using the "Left" or "Right" keys select
the desired menu item
3
Press the "Enter" key to select the
desired menu item
The menu items
- NOW
Displays real-time values
- LOG
Data recorded today, during the current calendar year and since the inverter was
started for the first time
- GRAPH
Day characteristic displays a plot showing the output power during the day. The time
axis is scaled automatically. Press the "Back" key to close the display
- SETUP
Setup menu
- INFO
Information about the device and the software
49
EN