EasyManua.ls Logo

Fronius Symo Hybrid 3.0-3-S - Suitable Third-Party Batteries for Fronius Symo Hybrid; Compatibility with LG Chem ResuH and BYD Battery-Box

Fronius Symo Hybrid 3.0-3-S
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Suitable third-party batteries for Fronius Symo
Hybrid
LG Chem ResuH Fronius expressly points out that third-party batteries are not Fronius products and that
Fronius is not a trader or distributor of these batteries. This means that Fronius accepts
no liability for these batteries and cannot offer any kind of warranty.
The Fronius Symo Hybrid can be operated with an LG Chem type RESU7H(Type-R) or
RESU10H(Type-R) high-voltage battery.
A Fronius Checkbox 500V is required to connect an LG battery to a hybrid inverter.
Emergency power mode is not possible when operating the LG Chem high-voltage bat-
tery.
Read this document and the Installation Instructions for the Fronius Symo Hybrid, the
Fronius Checkbox 500V and the third-party battery carefully before installation and com-
missioning.
All Fronius documents are available at the following address:
www.fronius.com/photovoltaics/infocentre/tech-support/how-to-install
The documentation for the LG Chem ResuH is enclosed with the third-party battery, or
you can acquire it from the third-party manufacturer.
WARNING!
Hazard posed by DC voltage of inverter and battery.
This can result in serious injuries or death.
The Fronius Checkbox 500V must be installed in the system in accordance with the
Installation Instructions.
Read and follow the "Fronius Checkbox 500V" Installation Instructions. The Installa-
tion Instructions are supplied with the Fronius Checkbox 500V.
Wire the "Third-party battery with Fronius Symo Hybrid and Fronius Checkbox
500V" in accordance with the Circuit Diagram. The Circuit Diagram is supplied with
the Fronius Checkbox 500V.
BYD Battery-Box
Premium
Fronius expressly points out that third-party batteries are not Fronius products and that
Fronius is not a trader or distributor of these batteries. This means that Fronius accepts
no liability for these batteries and cannot offer any kind of warranty.
The Fronius Symo Hybrid can be operated with the following BYD Battery-Box Premium
variants:
- HVM 8.3
- HVM 11.0
- HVM 13.8
- HVM 16.6
- HVM 19.3
- HVM 22.1
Read this document and the Installation Instructions for the Fronius Symo Hybrid and the
third-party battery carefully before installation and commissioning.
All Fronius documents are available at the following address:
www.fronius.com/photovoltaics/infocentre/tech-support/how-to-install
32

Table of Contents

Related product manuals