The current time appears.
(HH:MM:SS, 24-hour clock),
the “tens” digit for the hour will flash.
5
Use the “Up” and “Down” keys to
select a value for the “tens” digit of
the hour.
6
Press the “Enter” key.
The “units” digit for the hour will flash.
7
Repeat steps 5 and 6 to set the
“units” digit for the hour, for the
minutes and for the seconds until...
the set time starts flashing.
8
Press the “Enter” key.
The time is applied and the overview of
values that can be changed is dis-
played.
4
Press the “Esc” key.
Relay
Standby
Relay
Clock
Display Setting
Energy Yield
The “Time / Date” item on the Setup
menu appears.
59
EN
To Next Page
Loading...
