Fronius Symo Hybrid 3.0-3-S - Calculating Data Volumes for System Monitoring (continued); Data Volume Calculation Overview (continued)

Data volume per month:
Sent Configuration 5 min logging 30 min logging
Hourly
(06:00 - 20:00)
INV 13 MB 10 MB
INV + SM 20 MB 11 MB
INV + SM + 3x BAT 67 MB 19 MB
INV + SM + 4x BAT 78 MB 20 MB
INV + SM + 5x BAT 90 MB 23 MB
INV + SM + 6x BAT 101 MB 24 MB
INV + SM + 7x BAT 106 MB 26 MB
INV + SM + 8x BAT 126 MB 28 MB
Daily INV 1 MB 1 MB
INV + SM 2 MB 1 MB
INV + SM + 3x BAT 7 MB 2 MB
INV + SM + 4x BAT 8 MB 2 MB
INV + SM + 5x BAT 10 MB 2 MB
INV + SM + 6x BAT 11 MB 3 MB
INV + SM + 7x BAT 12 MB 3 MB
INV + SM + 8x BAT 13 MB 3 MB
A data volume of approx. 500 kB per hour is required to view the system on Fronius
Solar.web or the Fronius Solar.web App.
A certain data volume is also required to update the Fronius system monitoring firmware.
This data volume depends on the size of the update package and therefore cannot be
considered in the advance data volume calculation.
If data is sent via a third-party service (e.g. push service), a large quantity of data may be
involved.
IMPORTANT! Fronius recommends a flat rate data connection to avoid high connection
charges.
71
EN