Fronius Symo Hybrid 3.0-3-S - Services: Firmware Update via LAN; Firmware Update via LAN Connection Steps

6
Select 'Update via LAN'
7
Enter the IP address of the PC/laptop.
8
Click the 'Run update' button.
A confirmation prompt for the update is displayed.
9
Click the 'Yes' button
The update is performed and progress is indicated in the form of a bar and as a per-
centage.
10
Once the update has been successfully completed, click on the Apply/Save
button
The “Supply LED” lights up steady green again to indicate that the update process is
complete.
If the connection to the server fails:
- Deactivate the firewall for the amount of time required to complete the update.
- Try again.
88