Procedure for stitch welding:
1
Hold the welding torch vertical
2
Depending on the selected mode:
press and hold the torch trigger (2-step mode)
press and release the torch trigger (4-step mode)
3
Keep the torch in the same position
4
Wait for the welding interval
5
Position the welding torch at the next point
6
To end stitch welding, depending on the selected mode:
release the torch trigger (2-step mode)
press and release the torch trigger (4-step mode)
7
Wait for the gas post-flow time
8
Lift the torch off the workpiece
75
EN
To Next Page
Loading...
