Fuji Electric FLD-1 - 10.5.4 PRINTING OF GRAPH

INF-TN1FSC-E 115
10.5.4 PRINTING OF GRAPH
Up to 10 items available for graph printing are enumerated below:
• Flow rate (2 items) • + Flow rate total
• Flow velocity • – Flow rate total
• Analog input (2 items) • + Thermal total
• Thermal fl ow rate (5 items) • – Thermal total
Only desired items out of 10 items are allowed to print. One or more items are selectable simul-
taneously.
(1) When the cursor is pointed to “KIND” on the PRINT-
ING OF GRAPH screen, press the
ENT
key to select
the item for which graph is to be printed.
Press the
or key and press the
ENT
key.
After selecting the item, return the cursor to “KIND”
by the
ESC
key.
(2) Move the cursor to “SCALE” by the
or key.
Press the
ENT
key so that the scale can be set.
After setting the maximum and minimum values of
data, and press the
ESC
key to return the cursor to
“SCALE”.
(3) Move the cursor to “TIMER” by the or key.
Press the
ENT
key to select the following mode of the
timer.
• MANUAL
• FIXED TIME
• TIMER
Then, set the printing cycle.
(4) Move the cursor to “START” and press the
ENT
key
to start printing.