Fuji Electric FLD-1 - 7.9 Viscosity

INF-TN1FSC-E 33
7.9 Viscosity
There is no need to change “1.0038E-6m2/s” when measuring water.
Return the screen by pressing the key.
Remarks
Dynamic viscosity coeffi cient is set to water (20°C).
When measuring accurately or measuring fl uid other
than water, enter as needed.
(See page 163, Table (29).)
(Range: 0.001 × 10
−6
to 999.999 × 10
−6
m
2
/s)
Press the
key, the “VISCOSITY” is reversed
from white to blue.
Press the
ENT
key, you can enter the dynamic vis-
cosity coeffi cient.
Move the digit by pressing the
or key and
enter numeric values by using the
or key.
After entry, press the
ENT
key.
ENT
ENT