Fuji Electric FLD-1 - 7.3 Outer diameter of piping (unit: mm)(range: 13 to 6000 mm)

INF-TN1FSC-E 27
7.3 Outer diameter of piping (unit: mm)
(range: 13 to 6000 mm)
The “OUTER DIAMETER” is reversed from
white to blue, on the “PROCESS SETTING”
screen
Press the
ENT
key, the screen of “OUTER DIAM-
ETER” for selecting the input method of outer
diameter measurement and “CIRCUMFERENCE”
screen will appear.
Press the
ENT
key after the selection to enter the
outer dimension.
Use the
or key to cause the digit to move in
the right and left direction
Use the
or key to enter the numeric.
After entry, press the
ENT
key.
Note) Enter outer dimensions, not nominal
diameter (example: 20A → 20).
ENT
ENT
ENT
Example) When the outer diameter of piping is 318.5 mm:
ENT ENT
Outer
diameter
Perimeter
Outer diameter of piping Perimeter of piping