Fuji Electric FLD-1 - 10. Setting Operation (Application)

INF-TN1FSC-E 63
10. SETTING OPERATION (APPLICATION)
This section describes an outline and page confi guration of each function page.
Various function pages are called up from the menu screen.
SITE SETUP RANGE
Setting of input and
output range
Condition settings for
measurement
DATA LOGGER
PRINTER
Various outputs on printer
Saving of measured value
to memory, and display
and output of data
SYSTEM SETUP MAINTENANCE
Check function of
device status
Change of basic system
settings of main unit
[Menu screen][Measure screen]
Various function pages
or
ENT
ESC
or
ESC
MENU
MENU
MENU
Note) For fl ow velocity distribution within option, refer to “10.7 Flow velocity distribution display func-
tion (option).