Fuji Electric FLD-1 - 10.6 Maintenance function (MAINTENANCE screen); 10.6.1 Checking receiving status for transit time

INF-TN1FSC-E 117
10.6 Maintenance function (MAINTENANCE screen)
This function allows you to check the condition of this instrument.
10.6.1 Checking receiving status for transit time
(1) When an error is detected on measurement screen
(1) Move the cursor to “1:TRANSIT TIME” on the
MAINTENANCE screen and press the
ENT
key.
The TRANSIT TIME/SIGNAL CHECK screen is
displayed.
(2) Move the cursor to the status display fi eld on the
“TRANSIT TIME/SIGNAL CHECK” screen and
press the
ENT
key.
For content of error, refer to “10.8 Contents of errors in status display”