INF-TN1FSC-E 135
10.7.2 Operation
(1) Flow velocity profi le display
(1) Measurment screen
Preparation
Set the following items on the process setting screen
• Pipe outer diameter (Page 27), Material (Page 28),
Thickness (Page 29)
• Lining material (Page 30), Thickness (Page 31)
• Fluid kind (Page 32)
• Transmission voltage (Page 36)
Note) For metal pipes, raise the transmission voltage to 160Vp-p.
(2) Press
key to display “MENU” screen.
Select fl ow velocity profi le with the cursor key.
(3) Press the
ENT
key twice, fl ow velocity profi le screen will display.
[fl ow velocity profi le screen]
To Next Page
Loading...
