Fuji Electric FLD-1 - 16.5 File contents of SD memory card; 16.5.1 Types of measured data to be logged

176 INF-TN1FSC-E
16.5 File contents of SD memory card
16.5.1 Types of measured data to be logged
Measured data to be logged is of 14 types indicated below.
Table 16-1 Data types
Kind Name Sign
Maximum number
of places of integer
section
Number of places
of decimal
Unit
VELOCITY VELOCITY Yes 3 places 3 places m/s
FLOW RATE FLOW RATE Yes 12 places 4 places Flow unit
FLOW RATE (%) FLOW RATE (%) Yes 3 places 3 places %
+TOTALIZER +TOTALIZER No 10 places 3 places Total unit
−TOTALIZER −TOTALIZER No 10 places 3 places Total unit
AI CHANNEL 1 AI CHANNEL 1 Yes 10 places 3 places —
AI CHANNEL 2 AI CHANNEL 2 Yes 10 places 3 places —
SUPPLY TEMP. SUPPLY TEMP. Yes 3 places 3 places
Temperature
unit
RETURN TEMP. RETURN TEMP. Yes 3 places 3 places
Temperature
unit
TEMP DEFFERENCE
TEMP
DEFFERENCE
Yes 3 places 3 places
Temperature
unit
THERMAL FLOW THERMAL FLOW Yes 10 places 3 places
Thermal fl ow
unit
THERMAL FLOW (%) THERMAL FLOW (%) Yes 3 places 3 places %
+TOTAL
(THERMAL)
+TOTAL
(THERMAL)
No 10 places 3 places
Total unit
(Thermal)
−TOTAL
(THERMAL)
−TOTAL
(THERMAL)
No 10 places 3 places
Total unit
(Thermal)
In case heat mode is “NOT USED”, it is invalid even if feeding temperature and subsequent
have been selected.
If the system unit was changed after logger start, logging is performed in the unit at the time of
start. The changed unit becomes valid after the logger is stopped.