26 INF-TN1FSC-E
(7) Move the cursor to “END” and press the
ENT
key
to complete the character entry.
When moving the cursor in the character entry fi eld
Press the
ESC
key so that the cursor “ | ” will change to
“ █ ”.
The cursor can be moved by the and the key.
For entering characters to the place the cursor is
moved, press the
ESC
key
The cursor moves to the character entry fi eld.
Note 1) Entry can be made with alphanumeric characters.
Note 2) To stop character entry in the middle, select “CAN” and press the
ENT
key.
The original SITE MEMORY screen reappears.
To Next Page
Loading...
