INF-TN1FSC-E 81
(5) Select the kind of data by the or key and press
the
ENT
key so that the selected data will be logged.
One or more items are simultaneously selectable.
Press the
key to display kind of data on the second
page.
(7) Set the logging operation mode. Move the cursor
pointed from “KIND” to “MODE” by the key.
(6) After selection, return the cursor to “KIND” by the
ESC
key.
(8) Press the
ENT
key, and the cursor moves to “CON-
TINUOUS”.
Then, press the
key to move the cursor to “SET
TIME”.
CAUTION
• Do not remove the memory card while data is written in it. Otherwise the logger data can
not be read.
• Do not turn the power off during reading the data to memory card. Otherwise the logger
data can’t be read.
To Next Page
Loading...
