84 INF-TN1FSC-E
(5) To change kind of data to be displayed:
Move the cursor to “SOURCE” and press the
ENT
key
to enter the SOURCE screen. Select the kind of data
by pressing the
or key.
Note) Display only types of logged data.
(6) To change scale of time axis (horizontal axis) and
data axis (vertical axis):
Move the cursor to “ZOOM” to enlarge or contract
the time axis by the
or key.
Enlarge or contract the data axis by the
or key.
Displays logging conditions.
Graduation interval
Cursor
Data axis zoom bar
(vertical axis).
Enlarging the graph
Movement of
data axis,
time axis and
cursor display
Data value at the position of cursor
Time axis zoon bar (Horizontal axis).
Kind of data
(Displays kind of data displayed on
the graph)
Prints the data within the display range in graph format.
Mode Description
Enlarge/contract
To Next Page
Loading...
