Fuji Xerox ApeosPort-VI C3370 - Page 614

Problem Solving
614
Problem Solving
15
026-708
[Cause] Exceeded the maximum limit for the scan data size that can be
stored for one job with Store & Send Link.
[Remedy] Take one of the following measures:
1) Reduce the resolution (scan quality) of the scan parameters
and execute the operation again.
2) Reduce the image with magnification of the scan parameters
(such as A3 > A4) and then execute the operation again.
3) If [Store & Send Link - Maximum File Size] is set to a small
value, increase the value.
026-709
[Cause] The capacity of the hard disk that can be used to store scan
data with Store & Send Link is insufficient.
[Remedy] Wait around one day, and when capacity becomes available as
a result of the automatic deletion of files, execute the operation
again.
026-710
[Cause] The machine has received and e-mail encrypted by S/ MIME,
but does not support the encryption method.
[Remedy] Take one of the following measures:
z
Ask the sender to send the e-mail encrypted by 3DES.
z
Disable the FIPS140 validation mode of the machine.
026-711
[Cause] Exceeded the maximum size allowed for a multi-page file when
scanning.
[Remedy] Take one of the following measures:
1) Reduce the resolution (scan quality) of the scan parameters
and execute the operation again.
2) Reduce the number of document pages and then execute the
operation again.
The maximum size is 2 GB for TIFF, XPS, and PDF, and 1 GB for
XDW.
Note
z
XPS stands for XML Paper Specification.
026-712
[Cause] An error occurred while operating from CentreWare Internet
Services.
[Remedy] Retry after waiting for a while.
026-718
[Cause] Incompatible print parameters are used. The combination of
the specified features such as Document Size, Paper Size, Paper
Tray, 2 sided printing, and Output Tray is incompatible.
[Remedy] Confirm the print data, and try printing again.
026-719
[Cause] An error occurred while operating the Store to USB service.
[Remedy] Wait for a while and execute the operation again. If the error
still is not resolved, contact our Customer Support Center.
026-720
[Cause] The capacity of the USB memory device of the recipient is
insufficient while performing the Store to USB service.
[Remedy] Confirm the amount of available space.
Error Code
Cause and Remedy