Error Code
615
Problem Solving
15
026-721
[Cause] An error occurred while operating the Store to USB service.
[Remedy] Check the following conditions:
z
The USB memory device is inserted into the USB memory
slot.
z
The USB memory device is accessible from your computer.
z
The unencrypted USB memory device is used.
026-722
[Cause] The USB memory device is not initialized.
[Remedy] Initialize the USB memory device on a computer with the
following file format, and then execute the operation again.
z
Supported file formats: FAT12, FAT16 (FAT), FAT32
z
NTFS is not supported.
z
A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact our Customer Support
Center.
026-723
[Cause] The machine failed to access to the medium.
[Remedy] 1) Check that the medium is not inserted or removed, or the
other medium is not inserted, while the machine is
referencing the medium.
2) Check that the file in the medium can be accessed via a
computer.
026-724
026-725
[Cause] An error occurred while connecting to the EP system via the
Internet.
[Remedy] Contact our Customer Support Center.
026-726
[Cause] The machine configuration information at a print job
specification does not match the actual machine configuration.
[Remedy] Modify the machine configuration information in the print
driver screen to match the actual machine configuration.
026-727
[Cause] Probable causes are as follows:
1) Unusable characters are included in the path name of the file
location.
2) The length of the path name of the file location (including
extension) exceeds the number of characters available.
[Remedy] Take one of the following measures:
1) Change the path name of the file location.
2) Set the path in the range of 1 to 255 bytes.
026-728
[Cause] An error occurred during WSD communications.
[Remedy] Check whether the network cable is correctly connected or check
the amount of available memory of the destination device.
z
WSD stands for Web Services on Devices.
Error Code
Cause and Remedy
To Next Page
Loading...
