Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

5 Tools
98
Tools
5
System Settings Procedure
To change or customize the system settings, enter the System Administration mode.
This section describes the basic procedures for system settings. The following shows
the reference section for each procedure.
Step 1 Entering System Administration Mode ...........................................................................98
Step 2 Entering the System Administrator User ID and Passcode .............................................98
Step 3 Selecting [Tools]..............................................................................................................99
Step 4 Selecting a Setting Item on the [Tools] Screen................................................................99
Step 5 Setting a Feature ............................................................................................................100
Step 6 Exiting System Administration Mode ...........................................................................100
Step 1 Entering System Administration Mode
1
Press the <Log In/Out> button or the login
information area on the touch screen.
Step 2 Entering the System Administrator User ID and Passcode
To enter the System Administration mode, enter the system administrator User ID. If
[Passcode Entry from Control Panel] is set to [On] under [Authentication/Security
Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.
We recommend that you change the system administrator user ID and passcode
immediately after installing the machine.
For more information on how to change the passcode, refer to "System Administrator Settings" (P.229).
1 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, and then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
• The screen may differ depending on the settings of the machine.
• The <Log In/Out> button is lit when the machine enters the System Administration mode.
123
456
789
0#
C
<Log In/Out> button
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English