Common Service Settings
125
Tools
5
Note • EP system may not be available in some regions. For more information, contact our
Customer Support Center.
For information on EP system, refer to "EP System" (P.613).
1 Select [Software Upgrade].
2 Select [Start Upgrade].
3 Select [Yes].
The machine starts downloading the software.
Note • After the downloading is finished, the machine automatically restarts and upgrades the
software. After the machine restarts again and the [Services Home] screen is displayed, the
software upgrade is completed.
Delete All Certificates/Initialize Settings
Deletes all certificates stored in the machine and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data in the
machine because of an abnormality of certificate file even when the certificate is set to
enabled for [SSL/TLS Settings] under [Connectivity & Network Setup] > [Security Settings].
Watermark
Watermark is the function to print text or background pattern on the whole page to
inhibit the replication of documents.
You can configure Watermark settings such as date or text, background pattern, and
watermark to embed.
Date Format
Set the format for printing dates. This setting is common to Annotation, Watermark, and
Force Annotation.
Three date formats are available: 20yy/mm/dd, mm/dd/20yy, and dd/mm/20yy.
Default Watermark Effect
Set the default type of text effect for Watermark.
îš„Off
A text effect is not applied.
îš„Embossed
When you re-copy a copied document with watermark, the text hidden in the background is
printed as embossed text.
îš„Outline
When you re-copy a copied document with watermark, the text hidden in the background is
printed as white cutout.
Default Watermark
Set watermark text.
You can select text from [Copy Prohibited], [Copy], [Duplicate], and the strings assigned to
Custom Watermark 1 to 3.
For more information about custom text, refer to "Custom Watermark 1 to 3" (P.126).
Font Size
Set the size of the text to be printed as the Watermark.
You can set the font size from 24 to 80 points in 1 point increments.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
