Configuring Machine Settings Using CentreWare Internet Services
243
CentreWare Internet Services Settings
6
Configuring Machine Settings Using CentreWare Internet
Services
CentreWare Internet Services enables you to change various settings on the machine
from a computer.
Note • Confirm that the port in use is enabled in [Properties] tab > [Connectivity] > [Port Settings] of
CentreWare Internet Services when an item that you want to set is not displayed.
• If you change a setting from CentreWare Internet Services while the control panel is being
used, the change does not take effect until you manually reboot the machine. If [Auto Clear]
is set to [On], the changed items are displayed on the control panel after the machine
reboots. For information about Auto Clear, refer to "Auto Clear" (P.114).
• You may be prompted to enter your user name and passcode when you attempt to change
settings on CentreWare Internet Services. In that case, enter the system administrator's
user ID and passcode into the [User Name] and [Password] fields. The default user ID is
"11111" and passcode is "x-admin".
You can configure the following settings with CentreWare Internet Services:
Important • To display the online help for CentreWare Internet Services, users need to have the
environment to connect to the internet. The communication fee shall be borne by you.
Note • For details on the setting items, click [Help] at the upper right corner of the CentreWare
Internet Services screen to see help.
Item How to Select Overview/Reference
Usage Counters Select from [Status] tab
> [Counters]
Displays the total number of pages
printed for each service.
Job Templates Select from [Scan] tab Allows you to create, edit, copy, or
delete job templates.
Folder Refer to "Create Folder" (P.202).
Job Flow Sheets Refer to "Create Job Flow Sheet" (P.204)
Add New Name Select from [Address
Book] tab
Refer to "Add Address Book Entry"
(P.212).
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
