Supplies
93
Machine Status
4
Supplies
You can check the status of consumables on the [Supplies] screen. The status of
consumables is shown as "OK", "Replace Soon (Order Now)", or "Replace Now".
The following describes the procedure to check the status of consumables.
For information on replacing consumables, refer to "Maintenance" (P.53).
1 Press the <Machine Status> button.
2 Select the [Supplies] tab and confirm the
status of the toner and other consumables.
Note • Pressing a supply name displays a
screen about the status of the supply.
On the [Supplies] screen, you can check the
following items:
Important • If you replace a toner cartridge with a partially used toner cartridge, the displayed status may
differ from the actual remaining amount. When you replace toner cartridges, we recommend
that you use new ones.
Note • Pressing a supply name displays a screen about the status of the supply.
• The items displayed vary depending on the options installed.
• Select [ ] to display the previous screen or [ ] to display the next screen.
z
Toner Cartridge
z
Booklet Staple Cartridge [R2]
z
Drum Cartridge
z
Booklet Staple Cartridge [R3]
z
Fuser Assembly
z
Hole Punch Waste Container [R4]
z
Staple Cartridge [R1]
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
