Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

16 Appendix
550
Appendix
16
PCL Settings List
The following table describes the parameters that can be set with the mode menu.
Parameter I tem No. Value
Paper tray 201 Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation in multiple trays is loaded, paper will be fed in the order of Tray
1 J Tray 2 J Tray 3J Tray 4JTray 6. If paper of the same size is loaded
in multiple trays but in different orientations, feeding of the paper loaded in
the landscape orientation is prioritized.
Auto size 202 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default*) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5
× 14”
[22] : 8.5
× 13”
[23] (Default*) : 8.5
× 11”
[24] : 11
× 17”
[25] : Custom Size
[30] : 8K
Important • When Trays 1 to 4, Tray 6 is selected, [Paper Size] cannot be set. The
paper size loaded in the specified tray is displayed.
Note • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
• Depending on the combination of [Original Size] and [Paper Size], [?] may
be displayed for the magnification. In this case, the document is printed at
a scale of 100%.
Bypass size 203 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5
× 14”
[22] : 8.5
× 13”
[23] (Default) : 8.5
× 11”
[24] : 11
× 17”
[25] : Custom Size
Output
destination
204 Sets the output tray for the printouts.
[0](Default) :Center Tray - Lower
[1] :Side Tray (optional)
[2] :Center Tray - Upper
[80] :Finisher Tray (optional)
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English