Replacing Consumables
65
Maintenance
3
3 Empty the container.
4 Insert the emptied hole punch waste
container into the finisher until it stops.
5 Close the front transport cover, and then
close the top transport cover of the finisher.
Note • If the cover is not completely closed, a message will appear and the machine remain
paused.
Replacing Stamp
If the machine offers the Fax service and the Stamp Kit (optional) is installed, replace
the stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge as the ink may be adhered to the pad. If it
comes into contact with your skin, wash immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by
the maintenance service contract.
• Before using consumables, carefully read instructions and precautions on their packages.
Note • We recommend always keeping spare consumables/periodic replacement parts in stock.
• To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
1 Pull up the knob on the document feeder top
cover, and open the document feeder top
cover completely.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
