Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

15 Problem Solving
374
Problem Solving
15
The entire output
is faint.
When Tray 5 is used, the
size and type of the loaded
paper are different from the
settings on the print driver.
Load paper of the correct type and size
into Tray 5.
Refer to "Loading Paper in Tray 5" (P.43).
Two or more sheets may be
fed simultaneously.
Fan the paper well and load it again.
Refer to "Loading Paper" (P.39).
Paper becomes
wrinkled.
The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.39).
Paper has been added to
the paper loaded.
The paper is damp.
Text is blurred. The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.39).
Paper has been added to
the paper loaded.
The paper is damp.
White patches
appear vertically.
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new
one.
Refer to "Replacing the Drum Cartridge (for
customers having a spot maintenance
contract)" (P.58).
No toner remains in the
toner cartridge.
Replace the toner cartridge with a new
one.
Refer to "Replacing Toner Cartridges" (P.55).
Text or images
are printed at an
angle.
The paper guides in the
paper tray are not set in the
correct positions.
Adjust the horizontal and vertical paper
guides to the correct positions.
Refer to "Loading Paper" (P.39).
Symptom Cause Remedy
Paper feed direction
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English