Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

Trouble during Copying
377
Problem Solving
15
The copy is
misaligned or
skewed.
The document is not loaded
correctly.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document guides on
the document feeder are not
set in the correct positions.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The paper tray is not
inserted correctly.
Firmly push in the tray until it stops to set it
properly.
Refer to "Loading Paper" (P.39).
The paper guides in Tray 5
are not set in the correct
positions.
Load the document correctly, and align the
paper guides to the document edges.
Refer to "Loading Paper in Tray 5" (P.43).
Unable to copy
with the specified
size.
The document glass or the
document cover is dirty.
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.70).
The document is a
transparent type such as a
transparency film.
Place a white sheet of paper on top of the
document when copying.
The document is
misaligned.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document guides on
the document feeder are not
set in the correct positions.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document is a non-
standard size.
Specify the document size, and then copy.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document is folded. Flatten the curl and load the document
again.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document
edges are
missing on the
copy.
The document is larger than
the printable area.
Adjust [Reduce/Enlarge] to copy the
document smaller.
Outputs are not
stapled.
The Finisher is not attached. The Finisher is required to staple. Install
the Finisher, or change the print option
settings to cancel stapling.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
You cannot staple more than 50 pages.
Reduce the number of pages to 50 or
fewer.
Symptom Cause Remedy
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English