15 Problem Solving
446
Problem Solving
15
018-791
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "91" (server
connection error) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-792
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "92"
(unsupported feature) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-793
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "93" (no results
returned) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-794
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "94" (no more
results) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-795
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "95" (results
remaining) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-796
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "96" (client loop
detected) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-797
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message No "97" (referral
limit exceeded) for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
021-210
021-211
021-212
[Cause] An error occurred in the USB IC card reader.
[Remedy] Check the connection between the USB IC card reader and the machine.
Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the error still is not resolved, the USB IC
card reader may be defective. Connect an unbroken USB IC card reader and
execute the operation again.
021-213
[Cause] There is a problem with the unit price table settings for EP system.
[Remedy] The system administrator should exports the unit price table and modify it
using CentreWare Internet Services. Set any number between 1 to 9999999
and import the table modified to the machine.
021-214
[Cause] An error occurred during encrypted communication between the machine and
the USB memory device or the Memory Card Reader.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. Execute the operation again. If the error
still is not resolved, contact our Customer Support Center.
021-215
[Cause] The accounting/billing device connected does not match the device set on the
machine.
[Remedy] Change the setting on the machine or connect the correct accounting/billing
device, and switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
