Replacing Consumables
59
Maintenance
3
3 Lift up the release lever of the drum
cartridge, and slide the drum cartridge out
until you can lift the handle on top of the
drum cartridge.
4 Hold the handle and remove the cartridge
from the machine.
Important • Be sure to hold the drum cartridge by its
handle when removing it out of the
machine. If you do not hold it by its
handle, it might fall out of the machine
and soil the floor.
5 Remove the new drum cartridge from the
box.
Important • Do not place the new drum cartridge in an
upright position.
• Return used drum cartridges to our
Customer Support Center.
6 Place the drum cartridge on a flat surface.
Undo the sealing tape as shown, and
carefully pull it out to remove the protective
sheet out of the cartridge.
Important • Be sure to pull the protective sheet out
straight and horizontally. If it is pulled out
obliquely, it may tear before it is
completely out of the cartridge.
• After pulling out the protective sheet, do
not shake the drum cartridge or handle it
roughly.
7 Hold the drum cartridge by its handle and
slide it into the machine until it comes to a
stop.
Note • Be sure it is slid all the way into the
machine.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
