Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Maintenance
106
Maintenance
3
8 Place at least five sheets of white paper on the Calibration Chart to cover the Chart and
close the document cover.
9 Select [Start].
The message “Calibration in progress. - Copy Job” appears and the machine automatically
calibrates the colors. It takes about 10 seconds to complete calibration.
A screen showing the result appears.
10 Select [Confirm].
11 To continue calibration for other screen types, repeat steps 3 to 8.
12 Select [Close] repeatedly until the Services Home screen is displayed.
Note
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.
13 Copy or print to confirm the image quality.
Note
z
During auto calibration, the machine cannot receive print jobs and faxes.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB