Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Problem Solving
596
Problem Solving
15
071-212
[Cause] Tray 1 malfunction
[Remedy] Execute the operation again.
072-210
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for the Tray 2, and then
switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center. You can
use a tray other than Tray 2.
072-212
[Cause] Tray 2 malfunctioned
[Remedy] Contact our Customer Support Center. You can use a tray other
than Tray 2.
073-210
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then
switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center. You can
use a tray other than Tray 3.
073-212
[Cause] Tray 3 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other
than Tray 3.
074-210
[Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then
switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center. You can
use a tray other than Tray 4.
074-212
[Cause] Tray 4 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other
than Tray 4.
077-212
[Cause] Detected the installation of a tray of a different type than
expected.
[Remedy] Contact our Customer Support Center.
077-214
077-215
[Cause] Detected the installation of a tray of a different type than
expected.
[Remedy] Contact our Customer Support Center.
077-314
077-316
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
081-799
[Cause] [Fax Transfer from Address Book] is set to [On], but the fax
numebr of the forwarding destination is not registered in the
Address Book.
[Remedy] Register the fax number of the forwarding destination in the
Address Book, or set [Fax Transfer from Address Book] to [Off].
Error Code
Cause and Remedy

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB