EasyManuals Logo

Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Fuji Xerox DocuCentre-V C2263
771 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #605 background imageLoading...
Page #605 background image
Error Code
605
Problem Solving
15
118-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
118-311
[Cause] An error occurred during software processing.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-311
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Once IC Card Reader (optional) is connected to the machine,
the machine automatically changes the [Passcode Entry for
Smart Card Login] setting to [On] under [Tools] >
[Authentication/Security Settings] > [Authentication] >
[Passcode Policy]. Change the setting as required.
121-312
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch on the machine power without connecting the device for
EP system, and then set [Login Type] to any option other than
[Login to Remote Accounts] under [Tools] > [Authentication/
Security Settings] > [Authentication].
121-313
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch on the machine power without connecting the device for
EP system, and then set [Login Type] to any option other than
[Login to Remote Accounts] under [Tools] > [Authentication/
Security Settings] > [Authentication].
121-314
121-316
121-317
121-318
121-319
121-322
121-323
121-324
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C2263

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C2263 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C2263 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax
Memory (Standard)1GB
Duplex PrintingYes
Fax Transmission Speed33.6 kbps
Supported Operating SystemsWindows, Mac OS, Linux
ConnectivityUSB 2.0, Ethernet
Paper SizeA4, A5, B5
Hard Disk Drive160 GB

Related product manuals