105 Printing Basics
Loading Print Media in the Standard 250-Sheet Tray and
the Optional 250-Sheet Feeder
NOTE:
• To avoid paper jams, do not remove the tray while printing is in progress.
• Use only laser print media. Do not use ink jet paper in your printer.
1 Pull the tray out of the printer about 200 mm. Hold the tray with both hands, and remove it from
the printer.
2 Adjust the paper guides.
NOTE:
• Extend the rear side of the tray when you load Legal size paper.
3 Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on
a level surface.
To Next Page
Loading...
