Network Basics 84
Setting Up the Queue
To execute printing, you must set up the print queue on your workstation.
NOTE:
• When you have finished setting up the queue, you can print jobs from the applications. Start the print job from
the application, and specify the queue in the print dialog box.
However, you may be able to print only from the default queue depending on the application (for example
Mozilla). In these cases, before you start printing, set queue you want to print to as the default queue. For
information on specifying the default queue, see also "Setting the Default Queue" on page 87.
• For Red Hat Enterprise Linux 4 WS/5 Client
1 Open the URL "http://localhost:631" using a web browser.
2 Click Administration.
3 Enter root as the user name, and enter the administrator password.
4 Click Add Printer.
Enter the name of the printer in Name in the Add New Printer window, and click Continue.
You can optionally specify the location and description of the printer for further information.
For network connections:
a Select LPD/LPR Host or Printer from the Device menu, and click Continue.
b Enter the IP address of the printer in Device URI.
c Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
For USB connections with Red Hat Enterprise Linux 4 WS:
a Select USB Printer #1 from the Device menu.
For USB connections with Red Hat Enterprise Linux 5 Client:
a Select DocuPrint XXX USB #1 or DocuPrint XXX from the Device menu.
5 Select Fuji Xerox from the Make menu, and click Continue.
6 Select DocuPrint XXX from the Model menu, and click Continue.
The message Printer xxx has been added successfully. appears.
The setup is complete.
To Next Page
Loading...
Need help?
General
