163 Using the Operator Panel Menus
• LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
• Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain
paper quality adjustment settings, and configure the security settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• F/W Version
Purpose:
To confirm the current F/W version.
• Adjust PaperType
Purpose:
To specify paper density settings.
Values:
Disable
*
Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
Off Does not show the alert message when the toner is low.
On
*
Shows the alert message when the toner is low.
Plain Lightweight
Heavyweight
*
Labels Lightweight
Heavyweight
*
To Next Page
Loading...
Need help?
General
