127 Printing Basics
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Photo print-quality mode for a particular
graphic, select this setting in the driver before printing that job.
The following procedure uses the PCL 6 driver as an example.
1 With the desired document or graphic open in your application, access the Print dialog box.
2 Select the FX DocuPrint CP305 d PCL 6 and click Preferences to open the print driver.
3 Make selections on the driver tabs. See the following table for specific printing options.
NOTE:
• In Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows Server 2008
R2, and Windows 7, you can save current printing options with a distinctive name and apply them to
other print jobs. Select either the
Paper / Output
,
Image Options
,
Layout
, Watermarks / Forms, or
Advanced Settings
tab, and then click Save on the Paper / Output tab. Click
Help
for more
information.
4 Click OK to save your selections.
5 Print the job.
See the following table for specific printing options:
The table shown below uses the PCL 6 driver as an example.
Printing Options for Windows
To Next Page
Loading...
Need help?
General
