Fuji Xerox DocuPrint CP305 d

Using the Operator Panel Menus 160
• mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
• DefaultPaperSize
Purpose:
To specify the default paper size.
Values:
• Auto Job History
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
The Job History report can also be printed using the Report/List menu.
Out of Paper Off Does not emit a tone when the printer runs out of paper.
On* Emits a tone when the printer runs out of paper.
Low Toner Alert Off Does not emit a tone when a toner is low.
On* Emits a tone when a toner is low.
AutoClear Alert Off
*
Does not emit a tone 5 seconds before the printer performs auto
clear.
On Emits a tone 5 seconds before the printer performs auto clear.
All Tones Off Disables all the alert tones.
On
*
Sets the volume of all the alert tones at once.
Millimeters (mm)
*
Selects millimeter as the default measurement unit.
Inches (") Selects inch as the default measurement unit.
NOTE:
• The default for mm/inch varies depending on other settings, such as Country and Document
Size.
A4 - 210x297
Letter - 8.5x11
NOTE:
• The default for DefaultPaperSize varies
depending on country-specific factory default.
Off
*
Does not automatically print a job history report.
On
Automatically prints a job history report.