Fuji Xerox DocuPrint CP305 d

231 Troubleshooting
 Entering Values
Using the operator panel, enter the values found in the color registration chart to make adjustments.
1 Press the Menu button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance Mode, and then press the button.
4 Select Adjust ColorRegi, and then press the button.
5 Select Enter Number, and then press the button.
6 Ensure that Enter (LY, LM, LC) appears.
7 Press the or button to specify the values for LY, LM, and LC.
NOTE:
• To move the cursor to the next value, press the button.
8 Press the button.
9 Ensure that Enter (RY, RM, RC) appears.
10 Press the or button to specify the values for RY, RM, and RC.
NOTE:
• To move the cursor to the next value, press the button.
11 Press the button.
12 Ensure that Enter (PY, PM, PC) appears.
13 Press the or button to specify the values for PY, PM, and PC.
NOTE:
• To move the cursor to the next value, press the button.
Lattice pattern