159 Using the Operator Panel Menus
• Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is
cancelled if the time-out time is exceeded.
Values:
• Clock Settings
Purpose:
To specify the date and time formats.
Values:
• Audio Tones
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
Off Disables the job time-out.
On
*
30sec
*
Sets the time the printer waits for data to arrive from the computer.
5–300 sec.
Set Date & Time Time Zone Sets the time zone.
Set Date Sets the date depending on the Date Format settings.
Set Time Sets the time.
Date Format yy/mm/dd Sets the date format.
mm/dd/yy
dd/mm/yy
*
Time Format 12H Sets the time in 12-hour format.
24H
*
Sets the time in 24-hour format.
*1 The default for Date Format varies depending on country-specific factory default.
Control Panel Off
*
Does not emit a tone when the operator panel input is correct.
On Emits a tone when the operator panel input is correct.
Invalid Key Off
*
Does not emit a tone when the operator panel input is incorrect.
On Emits a tone when the operator panel input is incorrect.
Machine Ready Off Does not emit a tone when the printer is ready to process a job.
On* Emits a tone when the printer is ready to process a job.
Job Completed Off Does not emit a tone when a job is complete.
On* Emits a tone when a job is complete.
Fault Tone Off Does not emit a tone when a job ends abnormally.
On* Emits a tone when a job ends abnormally.
Alert Tone Off Does not emit a tone when a problem occurs.
On* Emits a tone when a problem occurs.
To Next Page
Loading...
