Printing Basics 112
•C5
To load an envelope into the SSF, insert the envelope short edge feed with the flap open and the print
side down. Ensure that the flap comes at the bottom when you face towards the printer.
OR
IMPORTANT:
• Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can
cause damage to the printer.
NOTE:
• Ensure that you load an envelope with the flap completely opened.
• Insert an envelope with the flap side face up and with the stamp area on the bottom right side.
Loading Letterhead in the Single Sheet Feeder (SSF)
When you use the SSF letterhead enters the printer first with the print side facing down.
To Next Page
Loading...
Need help?
General
