Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode
Choose the Correct Receive Mode
You must choose a Receive Mode depending on the external devices and telephone services you have on your
line.
By default, your machine will automatically receive any faxes that are sent to it. The diagram below will help you
select the correct mode.
Do you want to use the telephone feature of your machine (if available), an external
telephone or external telephone answering device connected on the same line as
the machine?
No
Fax Only Mode
Yes
Are you using the voice message function of an external telephone answering
device?
Yes
External TAD Mode
No
Do you want the machine to answer fax and telephone calls automatically?
Yes
Fax/Tel Mode
No
Manual Mode
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode].
If you cannot change the [Receive Mode], make sure the Distinctive Ring
1
feature is set to Off.
2. Press [Fax], [Fax/Tel], [External TAD], or [Manual].
3. Press .
Related Information
• Receive Mode Settings
Related Topics
• Telephone and Fax Problems
• Turn Off Distinctive Ring
1 Fax Ability in New Zealand.
210
To Next Page
Loading...
Need help?
General
