Level 1 Level 2 Level 3 Descriptions
Carbon Menu
Copy2 Macro...
Copy8 Macro
- Select a macro for Copy2 to 8.
The menu appears when printing two pages or more.
Tray Command
- - Select the correct version of PCL emulation.
Reset Printer
- - Restore the printer settings to the factory settings.
[All Settings] > [Network]
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method IP Boot
Tries
Select the BOOT method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server Primary
Specify the IP address of the
primary WINS server.
Secondary
Specify the IP address of the
secondary WINS server.
DNS Server Primary
Specify the IP address of the
primary DNS server.
Secondary
Specify the IP address of the
secondary DNS server.
APIPA
- Set the machine to allocate
the IP address from the link-
local address range
automatically.
IPv6
- Turn the IPv6 protocol on or
off.
Ethernet
- - Select the Ethernet link mode.
Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC
address.
Set to
Default
- - Restore the wired network
settings to the factory
settings.
Wired Enable
(For wireless
network models)
- - Turn the Wired LAN on or off
manually.
WLAN
(For wireless network
models)
TCP/IP BOOT Method IP Boot
Tries
Select the BOOT method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
599
To Next Page
Loading...
