136
6.3 Troubleshooting
(*) Press any button except the Power button.
YES
NO
YES
Has a long time passed since you
used the scanner the last time?
Does the display remain blank, even
after turning on the scanner again?
The power is in power saving
mode. To reactivate the scanner,
press any button on the operator
panel. (*)
The scanner operation is
normal.
Symptom 2
The indication of the Function Number Display
went blank.
NO
If the problem canot be resolved with this flowchart, refer to
"6.4 Before contacting a service partner."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
To Next Page
Loading...
